Our F series mud pump is designed and manufactured in strict accordance with the API 7K standard of the American Petroleum Association. All its expendable parts can be exchangeable with any other make pump. Therefore, the pump is easy to maintain internationally.
§equipped with pistons and liners of 6 ¾ inch;
§Pulse dampener, KB-75 type, fully equipped with connection flange, gauge, nitrogen charging device, etc.
§JA-3 shear relief valve with key
§Discharge manifold, suction manifold and connections, etc.
§Greasing system, splashing & forced greasing; with the gear oil pump for greasing the gears, bearings, crosshead, guiding plates, and extension rod etc.
§Pinion belt driven liner wash pump ASSY C/W all required accessories (wash pump, belt guard, hoses, recirculation tank ….) for cooling the liners’ pistons (there is electric spraying pump as alternative)
§Jib crane with hand hoist and trolley, to handle different weights
§Equipped with pump pressure gauges
§Technical documentation, including:
§- maintenance and operating manual; hydrostatic test report; report with pump parameters (flow, pressure, spm), obtained within the unit; materials test report; certificate of quality;
Main technical parameters:
|Type||Horizontal Triplex Single Acting Piston Pump||Gear Type||Herringbone Gear|
|Rated Input Power(KW/HP)||969/1300||Gear Ratio||4.206：1|
|Rated Stroke (SPM)||120||Lubrication||Forced & Splashing|
|Stroke Length（mm/in）||305/12〃||Valve Cavity||API-7#|
|Inlet Connection||12〃（305mm）||Outlet Connection||5 1/8〃Flange 5000PSI|
|SPM||Rated Power||Liner Dia.(in) and Pressure Rating (Mpa / psi)|
|Based on 100% volumetric efficiency and 90% mechanical efficiency|